Installation Manual

Posted by Deena

Minimum System Requirements:

• Windows XP
• 512 RAM
  
• Standalone Flash Player 8
• Zone Trigger

Flash Player Installation

1. Download standalone flash player from Adobe's Website.
   
   
2. After download, run the installer and follow the installing instructions.
   
   
3. After installation, you're done!
   

Zone Trigger Installation:

1. Download Webcam Zone trigger installer from: http://www.zonetrigger.com/motion-detection or get from the CD by going to "3rd Party Installer" folder -> "ZoneTriggerInstaller.exe". *
   * Please note by using the trial version, the limit is 15 days and 3 hot spots max. You need to buy the software to enable full use of "A Stroll" installer.
   
   
2. After download, install the program by running the installer and follow the software's installation instruction.
   
   
3. After installation is complete, you're set to run the program!

A Stroll Application

1. Ensure your webcam is connected to your computer and it's functionable.
   
   
2. Open Webcam Zone Trigger program**
   **Should already be installed. If not, refer to Zone Trigger Installation
   
   
3. Go to Pro mode
   
   
4. Click on File -> Load Setting and open "greensave.sav" under Setting File folder in the CD
   
   
5. Right click at the big grey screen, and select "Select another device". The image captured by your webcam should be shown on your screen. ***
   ***If it's not showing, refer to Setting Zone Trigger
   
   
   
   
   
   
6. Check if all the hot spots (the circles) are positioned properly. If not, click hold inside the circle of the affected hot spot(s) and drag it to the correct position.
   
   
7. Leave the program running after setting. Do not close the window!
   
   
8. Run "A Stroll" application by opening "Main.exe" under Publish Files folder, and maximize it by pressing Ctrl + F.
   
   
9. Now the installation's application is running.
   
   
10. If A Stroll application is not working as it's suppose to be, refer to Setting Zone Trigger .

Setting Zone Trigger

1) Webcam image isn't capturing at step 4 (A Stroll Application).
This means you would need to set a new zone trigger setting from scratch. This is how:

1. On the program, click File-> New Environment (if notification pops up, click Yes)
   
   
   
   
   
2. Click on the Camera with a plus icon and find your webcam's name in number 2 "Choose a video capture device". Your image capture should appear. ****
   ****If the problem persist, it's your webcam's problem. Check your webcam and ensure it's functionable otherwise get a new webcam)
   
   
3. Create 6 hot spots by clicking a Circle with a plus icon and position/resize them on your webcam's captured image.
   
   
4. For all hot spots, label their Names according to the scenes, ensure they are set to Motion Spots (type) and set all to Keyboard Key (action).*****
   *****Keyboard keys: recycling= D ; replanting= M ; transportation= G ; construction= R ; littering= E ; logging= N
   
   
5. Save your settings by going File-> Save Settings.

2) A Stroll application is not working
The setting in zone trigger isn't working with your room lighting to be able to detect motion. You might need to set the hot spots sensitivity:

1. At Zone Trigger Program, adjust the sensitivity for each hot spots by moving the sensitivity level.
   
   
2. If sensitivity adjusting don't work, you can adjust your room light setting to ensure your webcam can see well enough to detect motion properly.